Publications

Below is the publications directory

FETA

Association Constitutions Bylaws

FETA Review Magazine

FETA: Funding Energy-Efficient Technology Model

FETA: Funding Energy-Efficient Technology Model (FEET). It is a 1.7Mb pdf file. All operating information is contained in the pdf brochure. You'll also need to download the 2 Excel files that go with it.

General

  • FETA Application based DSEAR Risk Assessment GuidesNo.1: Installation of an R32 Split Air Conditioning System.
  • FETA Guidance on Risk Assessments for compliance with DSEARFollowing the publication of our introduction to A2L refrigerants, a number of FETA groups have been working on guidance for the industry with regard to Risk Assessments required for compliance with DSEAR – the Dangerous Substances and Explosive Atmospheres Regulation. With the growing use of a number of refrigerants which exhibit flammability to various degrees, this is a topic area which may be new to many working in the industry. It should be noted that DSEAR now applies to ALL RACHP installations; not just those using flammable refrigerants.

ADCAS

BCIA

BFCMA

BRA

A2L REFRIGERANTS

A2L Refrigerants: Concept and Application Guide for Refrigeration Systems in the Scope of EN 378

This Guide covers the application of A2L refrigerants in refrigeration systems which are within the scope of EN 378. It does not cover air conditioning and heat pump systems and it does not cover small (integral) systems which are within the scope of a product standard. It is not a complete design guide. The Guide takes a risk assessment based approach – the hazards of A2L refrigerants are identified and the methods of mitigating these hazards are covered, in this case by following the appropriate standard (EN 378). A Quick Start Guide has also been written to cover the basics of the topic.

BRA Fact Finders

BRA-IoR GUIDE TO GOOD COMMERCIAL REFRIGERATION PRACTICE

PLEASE NOTE previously published as a 9 part guide, with the exception of parts 2,3 and 9, the other sections are being withdrawn as commercial sites are now working to their own specifications. Parts 2,3 and 9 will be kept up to date as reference guides for commercial systems.

Code of Conduct for carbon reduction in the retail refrigeration sector

Putting into Use Replacement Refrigerants report

The first edition of this report was produced by members of the British Refrigeration Association (BRA). The purpose of the report was to help people address the implications and requirements of the EU F-Gas regulation which came into force on 1st January 2015, with specific reference to the replacement of R404A.

HEVAC

    test
  • HEVAC General Specification and Product Directory for Air Distribution and Related Equipment The Air Distribution Group of the HEVAC Association was formed by Members involved in the manufacture and supply of Air Distribution Equipment. The equipment offered by these member firms covers the whole range of grilles, diffusers, air terminal devices, louvres, terminal units, fan coil units, chilled beams and ceilings, duct dampers, smoke/fire dampers and ventilators. The equipment is manufactured to a high standard of quality and design to meet the stringent requirements of the H.V.A.C. Industry. This publication can be downloaded here and consists of a General Specification and Members Product Directory covering the full range of products in some detail. The contents will be of considerable value to those involved with the selection of Air Distribution Equipment
    • test
  • Design of Smoke Ventilation Systems for Loading Bays & Coach Parks – a guide for system designers This document sets out to give guidance to the design of ventilation systems for loading bays, service yards and coach parks and lists the options available to the design engineer. This document should also be of assistance to the regulating authorities in assessing the suitability of systems submitted for their approval.
    • test
  • HEVAC Cold Store Air Curtain Guide Controlling the climate in and around cold stores is very complex because of the large temperature difference between inside and outside the cold store.
    • test
  • HEVAC Guide to Filtration - A Training Manual This manual has been prepared especially for use by heating, ventilation and air conditioning engineers and specifiers as a valuable source of reference. It contains in-depth information on aspects of air filtration, which we are sure will be of benefit to all who will use it.
    • test
  • CFD Modelling for Car Park Ventilation Systems – a guide for designers and regulators This document sets out the information and parameters that the designer should incorporate into the design of the CFD model. It is intended that this document should be of use to the designer in producing and running the CFD model and in writing the CFD report.
    • test
  • Guidance Note on the use of E-Procurement, including reverse bid auctions for HVACR products in the construction industry The HEVAC Association actively supports e-commerce activities. Within this context e-procurement, which is progressively being used more frequently by customers and member companies alike, can be viewed as a valuable tool within an organisation’s purchasing strategy.
    • test
  • Safe handling of refrigerants The downloadable file is a position paper from the HEVAC Air Conditioning Group. They are of the view that companies should embrace the existing voluntary ACRIB scheme now, so that companies are prepared when the mandatory scheme comes in. This would help to avoid bottle-necks in training and registration when the mandatory scheme starts.
    • test
  • HEVAC - Air Curtain Guide Brochure The HEVAC Air Curtain Guide is a basic introduction to air curtains and covers these topics: what is an air curtain; how do air curtains work; where air curtains are used; benefits of air curtains heating sources; design factors to consider when selecting an air curtain; design procedure for new build; controls
    • test
  • HEVAC Standard Response to Subcontractor/Supplier Assessment Request The HEVAC association has produced a questionnaire for member companies on which to present their company details and capabilities to potential customers. Entitled ‘Standard Response to Subcontractor/ Supplier Assessment Request’, the seven page document provides a standard format to enter your company information that includes, insurance details, QA policy, environmental policy, health and safety and company references among other details needed by potential clients.
    • test
  • HEVAC Installation frame for fire dampers In the early 1980's HEVAC produced a specification for the construction and installation of installation frames for fire dampers. After nearly 20 years of working with the same specification, the HEVAC Fire & Smoke Damper Committee issued a new specification in 2002 and again in 2012 - HEVAC6/5/83 rev2.
    • test
  • HEVAC Air Conditioning Group – Information paper There is some confusion over which simulation software can be used to demonstrate compliance with Part L (2006) of the UK Building Regulations for non-domestic buildings.
    • test
  • Rating scales of Seasonal Efficiency of Chillers - Seasonal Efficiency Ratings for Non-domestic HVAC Plant The report brings together the thinking behind the project, the development of the rating systems and the description of the schemes. The report will be used by the project team to publicise the rating schemes to a wider audience, and thereby promote their adoption. It is intended that it can be used by each of the partners to be placed on websites and used more in technical papers such as CIBSE or the Building Services Journal.

Air Conditioning Group

Air Source Split and Multi-Split Heat Pumps

F Gas

HEVAC Air Curtain Group

HEVAC Air Distribution Group

  • HEVAC request for clarification from MHCLG on fire damper insulationThere is some confusion in the marketplace as to the interpretation of the requirements in Approved Document B (ADB) (volumes 1 and 2) for Fire Dampers (EN15650, EN1366-2, EN13501-3 and EN15882-2) and Smoke Control Dampers (EN12101-8, EN1366-10, EN13501-4). HEVAC requested clarification from the UK Government Department responsible for Building Regulations, MHCLG, and their response is in this download.
  • HEVAC Guidance on Fire Dampers and Smoke Control Dampers
  • Air distribution products installation guidanceManufacturers of air distribution products including grilles, diffusers, other outlets, fire dampers and smoke control dampers provide essential guidance for their products to ensure that they will work, remain compliant, be safe and be secure during their expected operational lifetimes. The guidance provides the purchaser/installer with clear details of product installation and on-going maintenance. This must be checked before mounting, then carefully followed and not ignored.
  • Guide to Air Distribution Technology for the Internal EnvironmentThis booklet, first published in 2000 and revised in 2015, is intended as a guide to designers or contractors who install air diffusion equipment and is complementary to EN12238 - Air terminal devices - Aerodynamic testing and rating for mixed flow applications and EN12239 - Air terminal devices - Aerodynamic testing and rating for displacement flow applications. The use of the guide early in the design stage will assist both designers and contractors in obtaining a satisfactory air distribution system.
  • HEVAC Installation Frame for Fire DampersInstallation frame for fire dampers complying with the requirements of the Greater London Council. First published in 1983, revised in 2002 and again in 2012
  • Real Room Acoustic Test procedureThis code was written around 1986 by HEVAC members. Alan Fry, chairman of the HEVAC Acoustics Group, was the principle author.

HEVAC Air Handling Group

  • HEVAC Guide to Good Practice: Air Handling Units - 1991Air handling units vary greatly in size, function and complexity. Whether they be small or large, simple or complex, there are certain points to observe and pitfalls to avoid. It was the aim of this publication to guide the reader towards good practice, so that when the unit is installed it will perform in accordance with expectations. The components most commonly utilised within air handling units are dealt with individually and for each heading there has been gathered a list of do's and don'ts distilled from many years of experience. Fans though are not covered specifically since there is a separate HEVAC Fan Application Guide which should be referred to. With such an immense variety within the scope of air handling units the topics cannot be completely comprehensive, however, the m

HEVAC Chilled Beam and Ceiling Association

Chilled Beam and Ceil Association Fact Sheets

HEVAC Fan Coil Unit Group

Fact Sheets

Other Publications

  • Acoustic guideFirst published in 2009, the revised September 2022 edition of the Fan Coil Unit Group good practice guide to acoustics for fan coils is now available. New content includes “Guide NR”, vertical fan coils, variable air volume operation and “In duct” v “Radiated” Sound Power Levels. In addition, it contains worked examples of installations and gives advice on system components, the effect they can have, and the associated pitfalls that can occur, especially in relation to small scale projects.
  • BS 8850:2020 Fan coil unit performance. Determination of specific fan powerTest method as referred to in Approved Document L was published on 27 August 2020. Available from BSI Shop
  • Why use Fan Coil Units? The FCU Group produced a short leaflet in 2011 and revised it in July 2020 to bring to your attention the many advantages of fan coil unit systems, which are summarised and compared with the attributes of alternative systems.
  • A Comparative Study of Active Chilled Beam and Fan Coil Unit Energy ConsumptionFollowing a previous study where fan-coil units (FCU) and active chilled beams (ACB) were compared under different operating conditions, the HEVAC Fan Coil Unit Group in FETA commissioned EDSL to compare their relative energy consumption under the same operating conditions. There is an article on the study in the Sept 14 CIBSE Journal
  • Product Data Template for Fan CoilsThe BIMHawk Toolkit is an online database and suite of software programs and utilities for creating, managing and integrating Product Data Templates (PDTs) & Product Data Sheets (PDS’s) with other digital systems (eg: native BIM authoring software applications). The toolkit has been developed by NG Bailey in collaboration with CIBSE and the CIBSE BIM Steering Group to enhance the production of PDTs and allow them to be easily integrated within BIM Authoring Applications. A Product Data Template is a collection of Parameters that describe and define a specific Product or Product type. CIBSE PDTs are developed in conjunction with Product Manufacturers, Designers and Specifiers. Each PDT is rigourously peer reveiwed and made available for Public Comment prior to being published.
  • CIBSE TM43 - Fan Coil UnitsThis Technical Memorandum, which at Ecobuild in March 2011 was described by CIBSE as one of their "Best Sellers", sets out to describe all aspects of fan coil unit technology and provides manufacturers, designers, site personnel and operators a comprehensive guide. Please link to the CIBSE page where you can get this publication.

Do FCU comply with the new Part L Building Regulations?

Yes they do. Members worked closely with the MHCLG when they developed the new Part L in 2021 and they all supply fan coil units that comply with the regulations. Some end users have had difficulty in understanding the requirements for Specific Fan Power (SFP) under the new Part L. To help, the FCU Group had prepared the following position statements:

HEVAC Fan Manufacturers Association

  • SCA/FMA Best Practice Guide to Smoke extract fan maintenanceEmergency use fans for heat and smoke control systems are specifically designed and manufactured for safety critical applications. Harmonized standards of these regulations define a list of critical components. Repair and replacement of the defined critical components shall only be carried out by the manufacturer’s authorized representative. For fans certified by a notified body, the substitution of a critical component by an alternative version of this component, must be approved by the notified body. A BSI working group (FSH/25), with its members drawn from manufacturers, installers, test establishments and motor manufacturers, was formed to examine the key issues associated with smoke extract fans. The key objective of this guide is to raise awareness of the need to ensure that any
  • The FMA has produced a guidance leaflet Fan installation effects - a guide to installed fan performanceFan Installation Effects.
  • Guide to selecting suppliers of ATEX certified fans complying with EN14986The FMA has produced a simple to use flow chart to guide specifiers when selecting suppliers of ATEX certified fans, complying with EN14986, for Industrial applications. Implications on non-compliance for company executives is covered in the FMA-ATEXLeaflet below.
  • FMA statement on ATEX (7th edition)With the introduction of the ATEX directive into UK law on 1st July 2003, and recast in April 2016, there are technical and legislative aspects that have to be addressed by fan manufacturers AND by users of fans in potentially explosive atmospheres.
  • FMA statement on ATEX (7th edition)
  • FMA Guidance Document - Safety approvals standards for fansThe purpose of this guidance paper from the Fan Manufacturers Association is to identify some of the European and International safety standards that members' products can comply with.
  • CIBSE TM42 Fan Application GuideIn collaboration with CIBSE, the FMA updated their flagship publication - the Fan Application Guide. This Fan application guide considers the principles of air movement and the various fan types available in order to achieve the best results. The authors are all engineers with considerable experience in the fan industry. They discuss the principles and practice of air extract/supply system design, and offer guidance on fan selection to ensure that such systems perform their intended function efficiently. This publication has been produced not for the fan engineer but for the engineer who uses fans. It is aimed not only at specifiers, mechanical services designers and architects but also at those responsible for building services and plant maintenance.
  • FMA – ATEXATEX - Important new Health & Safety laws concerning explosive atmospheres affect YOU. If you have areas on your site where potentially explosive gases, vapours or dust could combine with air then you need to know about ATEX.
  • FMA-GN05-Power, Power Factor and Harmonics
  • FMA-GN2-AcousticsGuidance note on acoustics
  • Fan & Ductwork Installation GuideGood practice in terms of the ductwork components installed adjacent to a fan, is the starting point for providing an efficient and reliable air distribution system. The information summarised in this publication will be of particular benefit to air system designers, equipment specifiers and building services contractors. Additionally, fan manufacturers will be better placed to advise on the fan installation and the connecting duct system. The publication provides the air movement industry with a significant increase in the available knowledge on the effects of ductwork components fitted close to a fan. Furthermore, it is based on a very thorough test and analysis programme covering many different types of duct fittings and all the fan types commonly used in clean air applications.
  • Guide to Fan Noise and Vibration : 1984This guide deals with the acoustic and vibration characteristics of the fan in a system, the starting point for meaningful systems analyses. it is intended as a supplement to, and not a substitute for, existing text books. it is hoped that it will enable engineers to avoid many of the problems now suffered unnecessarily.

HEVAC Fire & Smoke Damper Committee

HEVAC Humidity Control Group

  • Evaporative Cooling GuideThis guide includes a description of evaporative cooling; comparison of mechanical cooling and evaporative cooling; incorporation of evaporative cooling systems; technologies; hygiene; typical applications and terminology.
  • KS 19 –HumidificationThe HEVAC Humidity Group has produced a joint publication with CIBSE as part of the Knowledge Series : KS 19 –Humidification. It is available in PDF format or printed copy from the CIBSE bookshop.
  • Humidity and the Impact on Human ComfortDescribes the options available to minimise the potential power consumption
  • HEVAC Humidity Group Members and ProductsMatrix showing members and the product types they supply
  • Code of Best Practice 3 - Live Steam Humidification Systems (Isothermal)Revised Jan 2014. First published in September 2012 and revised in January 2014, a Code of Best Practice for the design, installation and maintenance of steam humidification systems of the live steam type.
  • Code of Best Practice 2 - Atmospheric Steam Humidification SystemsHEVAC Code of Best Practice for the design, installation and maintenance of steam humidification systems of the atmospheric, self generating type.
  • Code of Best Practice 1 - Cold Water Humidification SystemsHEVAC Code of Best Practice for the design, installation and maintenance of humidification systems to reduce microbial contamination risk in cold water humidification, misting and fogging systems.
  • Code of Best Practice 4 - Planned MaintenanceThis guide provides information and advice on good practice in the commissioning and maintaining of a wide range of different types of humidifier. It is intended for anyone who has an interest in running humidifiers efficiently, effectively and safely, such as maintenance organisations, service personnel, facilities managers, end users and building services consultants. As such, it is orientated towards planned, preventative maintenance rather than taking a reactive break/fix approach.
  • HSE L8 Approved Code of Practice and guidanceLegionnaires’ disease - The control of legionella bacteria in water systems.
  • TM13 Minimising the Risk of Legionnaires' DiseaseAvailable to download from the CIBSE bookshop. TM13 was updated and revised in 2013 to provide the information needed to support the effective management of the risks and demonstrate pro-active compliance. While many of the basics of good Legionella control and building services management remain largely the same, CIBSE's understanding of the risks, processes and schemes by which people can maintain control and demonstrate compliance with regulatory requirements have developed.

HEVAC Residential Ventilation Association

  • British StandardsBSI produce many standards – some of the most relevant are: BS 5250:2002 Code of practice for control of condensation in buildings BS 5925:1991 Code of practice for ventilation principles and designing for natural ventilation BS 5720:1979 Code of practice for mechanical ventilation and air conditioning in buildings
  • Department for education and skillsBB 87 Guidelines for Environmental Design in Schools A revision of Design Note 17, provides guidance for architects and engineers on acoustics, lighting, heating, ventilation, water supply and energy consumption. Also gives targets for energy consumption in terms of carbon dioxide production. ISBN 0 11 271013 1 TSO 1997
  • Scottish Building Standards Division (BSD)In Scotland the Building Standards Division (BSD) has been re-integrated into the Scottish Government and has become part of a new directorate for the Built Environment which includes Planning and Architectural Policy. The Building Standards Division (BSD) is responsible for writing the Scottish building regulations or Technical Handbooks.
  • TrainingInstaller Training brochure and course booking form. There is further information on the Polypipe training website at www.polypipe.com/installer-training
  • RVA position on MVHR and open flue appliancesThe RVA has been asked by HETAS to consider the guidance associated with Mechanical Ventilation and Heat Recovery, when used with an open flue solid fuel appliance. The RVA is of the view that installers should follow the guidance in this paper, taken from Approved Document J 2010 and created and agreed by the RVA.
  • Safety Warning – Cord Operated EquipmentSafety Warning – Cord Operated Equipment. In the absence of clear specific legislation for ventilation systems RVA have produced a guide on this safety related issue.
  • Domestic MVHR systemsMVHR systems in homes – post-installation performance perception and reality. This paper summarises the combined experiences of our members on how systems perform post-installation and compares the maintenance of such systems with conventional ventilation systems for consideration alongside other opinions on these matters.
  • CPD for Domestic Ventilation
  • GPG 268 Energy efficient ventilation in dwellings (2006)Published by the Energy Saving Trust in 2006, the guide explains why ventilation is important, the impact that good ventilation has on achieving the efficient use of energy, and the importance of air-tightness. It also describes the advantages and disadvantages of a range of ventilation systems. The guidance is presented in two parts; General issues and theory relating to ventilation, Ventilation options.
  • Building Regulations: Approved Document F - Ventilation (2006 Edition)
  • Building Regulations: Approved Document L1 - Conservation of fuel and power in dwellings (2006 Edition)
  • Building Regulations: Approved Document L2 - Conservation of fuel and power in buildings other than dwellings (2006 Edition)
  • GPG155 Energy Efficient Refurbishment of Existing Housing (2003)This Guide provides advice to help landlords, private developers and others to refurbish and repair their existing housing in an energy-efficient way. It provides practical advice on the full refurbishment of dwellings as well as individual improvement measures during repair. The Guide answers the questions: How energy-efficient? What is cost-effective? How can I avoid problems? What are the best options to use? Where do I go for more information? This publication is based on experience gathered over many years and this edition updates the earlier (1995, and 2001) versions. Updated 2003 in line with HEEBPp standards and changes to building regulations in England & Wales, and Scotland.
  • DfES Guidance on Constructional Standards for Schools

HEVAC Smoke Control Association

Indoor Air Quality

PFAS

HPA

Are you interested in becoming a member of one of the associations within FETA?

Register Your interest